
Add to Cart
CB 24v 15A 360w Adjustable Switching Power Supply Fan Cooling
24v 15a 360w Led Light String Power Supply 220V/110V AC Input Voltage Single Output 24v 360W Strip Slim Switching Power
Protection:Short circuit/Overload/Over voltage
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
2 years warranty
IP rate: None waterproof IP20
Constant voltage
NO linear power supply
NO dimming
Model | JSPL-360-12 | JSPL-360-24 | |
Output | DC Voltage | 12V | 24V |
Voltage Tolerance | ±1% | ±1% | |
Rated Current | 30A | 14.6A | |
Current Range | 0~30A | 0~14.6A | |
Rated Power | 360W | 360W | |
Ripple & Noise | 150mVp-p | 150mVp-p | |
Voltage ADJ. range | 10.8~13.2V | 21.6~26.4V | |
Setup,rise time | 200ms,80ms/230VAC | ||
Hold up time | 20ms/230VAC 16ms/115VAC (at full load) | ||
Input | Voltage Range | 180~264VAC, 255~370VDC | |
Frequency | 47~63HZ | ||
AC Current | 4A/230VAC | ||
Efficiency | 83% | 87% | |
Inrush Current | Cold start 50A/230VAC 30A/115V | ||
Leakage Current | < 3.5mA/240VAC | ||
Protection | Overload | Rated output power 105%~150% start over load protection | |
protection type:Constant current limiting,recovers automatically after fault condition is removed | |||
Overvoltage | Protection type:Constant voltage limiting, recovers automatically after fault condition is removed | ||
Environment | Working temp., humidity | -10℃~+60℃, 20%~90%RH non-condensing | |
Storage temp., humidity | -20℃~+85℃, 10%~95%RH | ||
Temp. Coefficient | ±0.03%/℃(0~45℃) | ||
Withstand Vibration | 10~500Hz, 2G 10min./1cycle, period for 60min., each along X, Y, Z axes | ||
Safety | Withstand Voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |
Isolated Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25℃/70%RH | ||
Compliance | Safety Standard | Compliance to UL1012 | |
EMC Standard | Compliance to EN55022, Class B, EN61000-6-1 | ||
Others | Dimension | 223x68x40mm(LxWxH) 8.78x2.68x1.57inch | |
Weight/packing | 0.9kg/36pcs/31kg | ||
Note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. |
About Calculate Method:
If Your LED Strip 60LEDs/m, and each LED 0.2W, then calculate max LED Strip Length: 0.2W/LED × 60LEDs/m=12W/m, for example,24W÷12W/m=2m, so, support the LED Strip(60LEDs/m, 0.2W/LED) Length (Max)=2m.
AC: Alternating Current
DC: Direct Current
L/N: Connect Alternating Current
-V (COM): Output Negative
+ V: Output Positive (The output polarity cann't be reversed.)
FG: Connect Ground Wire
ADJ: Output Voltage Trimmer
1, Promotely reponse and fast production leadtime 2,Best pre-sale & after-sale service
3, Reliable products quality and good reputation 4,High manufacturing capacity
5. OEM/ODM